Savings
The Lean, Clean, Green Machine
Lean
Rapid Return on Investment
On average, the EVS Systems will recover 50-80% of solder produced by wave soldering machines as reusable solder. This generally equates to a reduction in solder purchases of 40-50%.
Running costs are negligible since the machine only uses a single phase electricity supply, an in house airline (for the 8K/10K range only) and the same operators that are already dedrossing the waves.
Within a short cycle time the solder is recovered, dispensed into the ingot tray and after cooling is ready to be put into the solder pot.
Clean
Self-Contained Process
The EVS’s self-contained process avoids excessive handling of heavy, dirty lead contaminated dross. It can operate with its own filtration system filtering out smells and noxious fumes, and uses no chemicals, radiation, or other noxious substances.
The leftover powder is dropped through a sealed chute directly into the dross bin, therefore no dross dust leaks from the machine during the process.
What you put in is what you get out– no chemicals or additives are used in the machine process, and the solder recovered by the EVS system is always within tolerance of the solder bath/pot.
Green
Environmental Savings
The EVS Systems recover waste material and returns it to a usable product onsite, reducing heavy lifting and moving of dirty substances around the workplace, and the transportation by road of materials to and from the supplier.
EVS machines fit perfectly with ISO14001 mantra of RECYCLE-REDUCE-REUSE, the coveted international environmental standard. The EVS Systems are a positive contribution to gaining and retaining ISO14001.
The EVS Solder Recovery Systems save you money and give you a payback as well as achieving an environmental impact.
Other Features and Benefits of the EVS Machine
- Stop using messy wave oils to reduce dross
- Stop using dross reducing chemical and powders to reduce dross
- Improves efficiency of wave soldering (less shorts and rework)
- Manufactured to international standards by experts in the wave solder and flux processes
- Consistent wave height
- Improve solder quality (less oxidation)
- Transportation, energy saving
- No chemicals and less heavy lifting (therefore safer, happier employees)
- Cleaner workshop floor
- Free up space in storage
- Small footprint
- Back-up service by experienced engineers
- Easy to service- low maintenance options available
- Longer intervals between service
- Reduce dross off-site by up to 85%
- Qualify company (i.e. better perceived by business world, government, customers, suppliers)
- Eliminates Nitrogen from the process
